Print Page | Close Window

Clifford RSX3.5 Alarm Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86112
Printed Date: July 07, 2025 at 4:51 PM


Topic: Clifford RSX3.5 Alarm Remote

Posted By: SILVERONE1
Subject: Clifford RSX3.5 Alarm Remote
Date Posted: November 24, 2006 at 8:51 AM

What does the button on the back marked P do and how is it used?  I don't have that button on older remotes.



Replies:

Posted By: psystems
Date Posted: November 24, 2006 at 9:29 AM
This is the program button for the remote: (you can also enter programming by holding all fiur buttons on the front of the remote)

Page notification - beep or vibrate
press P then lock within 5 secs to choose
LCD illumination - on/off
P then unlock
page mode on/off - will wake up and check car (on) will sleep until you press the a button (off)
P then snow flake (the last button)

Exit Programming stop pressing buttons for min 5 secs

enjoy

Take a look at my problems please under Clifford RSX3.5
Any ideas???



-------------
to go or not to lar


Print Page | Close Window