Print Page | Close Window

Remote Starter, 2005 Pontiac Bonneville

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86223
Printed Date: July 12, 2025 at 10:36 AM


Topic: Remote Starter, 2005 Pontiac Bonneville

Posted By: measlick
Subject: Remote Starter, 2005 Pontiac Bonneville
Date Posted: November 26, 2006 at 12:46 PM

I have a 2005 Pontiac Bonneville SE

I had a Python 1400XL installed.

When the car is running, the lock, unlock and trunk release keys do not work on the Python fob however they work just fine using the factory fob AND they work fine when the car is off.

The installer said the car must be blocking the commands while it is running, however they didn't know at the time the factory fob works. I figure if there isn't something they are missing I will have to have it removed and will end up with the add-on unit as I do not want to carry two fobs with me.

On a side note, I was driving home today and hit the 'lock' button on the new fob, of course nothing happened but about 4 minutes later when I got home and turned off my car my doors locked almost instantly (after unlocking from the shift to park).

Any idea's? Thanks!!




Replies:

Posted By: xtremej
Date Posted: November 27, 2006 at 8:14 AM

I would look for what interface they used ie 457gw ,1700g ,gmdl-bp etc.... I haven't seen this one yet but more info may help.



-------------





Print Page | Close Window