Print Page | Close Window

Bypassing factory alarm on 2000 durango

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86380
Printed Date: May 28, 2024 at 9:49 PM


Topic: Bypassing factory alarm on 2000 durango

Posted By: tct0073
Subject: Bypassing factory alarm on 2000 durango
Date Posted: November 28, 2006 at 11:16 PM

I have installed a remote start and alarm on my friends durango but  I can't figuer out how to bypass the factory alarm. Can anyone help me on this? A wiring diagram would be great! 




Replies:

Posted By: Mike M2
Date Posted: November 29, 2006 at 6:43 AM
Power Lock lt. GREEN/ orange  -  DKP, blk plug, right of park brake
Notes: Lock/arm is negative trigger thru a 647 ohm resistor. Unlock/disarm is negative trigger thru a 1562 ohm resistor. MUST use relays. Unlock requires a double pulse.

Can also use Directed 456L interface module.
Factory Alarm Arm arms with lock    
Factory Alarm Disarm disarms with unlock    
Disarm No Unlock single pulse power unlock wire


-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: tct0073
Date Posted: November 29, 2006 at 7:32 PM
How do you wire up the relays?


Print Page | Close Window