06 cobalt

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86417
Printed Date: May 15, 2024 at 7:44 PM

Topic: 06 cobalt

Posted By: splaudio
Subject: 06 cobalt
Date Posted: November 29, 2006 at 7:51 PM

going to be doing a alarm on one is there anything unexpected? i know about no starter wire in this car, the ign is fine to tap into for the alarms ign right.? ...

Replies:

Posted By: mobilecustoms
Date Posted: November 29, 2006 at 8:01 PM

yes

-------------

Posted By: splaudio
Date Posted: November 29, 2006 at 8:16 PM

i see for the door triggers you have to diode isolate why cant i just tap into the dom supervision? when a door is opened the dome light comes on.

if i have to go to door triggers do i have to diode isolate, there is no power locks.

is there any pix online of BCM in this car?

Posted By: cntrylvr79
Date Posted: December 01, 2006 at 8:12 AM

You could in theory go to the dome light for your door trgger. The only probem with doing that is if there's a delay on the domelight. Whenyou arm the alarm if the domelight is still on the alarm will read that the door is still open. Diode isolating is not a big deal.

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: splaudio
Date Posted: December 01, 2006 at 3:39 PM

i know its no big deal just thinking of a easier way. this business is to get it done correctly and save as much time as possible. time = money...

Print Page | Close Window