2001 gmc p/u remote starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86488
Printed Date: May 15, 2025 at 10:07 PM
Topic: 2001 gmc p/u remote starter
Posted By: cjl1969ca
Subject: 2001 gmc p/u remote starter
Date Posted: November 28, 2006 at 1:57 PM
i cant seem to find which wire is the starter wire i think there maybe a starter kill help!!!!!!!!
Replies:
Posted By: sparkie
Date Posted: November 28, 2006 at 7:50 PM
The starter wire should be a yellow wire. It may not be a thick wire.
-------------
sparky
Posted By: Velocity Motors
Date Posted: November 28, 2006 at 8:00 PM
It's a YELLOW ( 14 guage wire ) coming along side the steering column. You have to remove the lower knee bolster and the protective steel casing from around the steering column to access the wires.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: cjl1969ca
Date Posted: November 29, 2006 at 4:58 AM
do i need to use a relay?????
Posted By: Velocity Motors
Date Posted: November 29, 2006 at 8:22 AM
Yes you do need a relay. Wire up a relay like this and make sure you solder your connections to the cut starter wire. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: cjl1969ca
Date Posted: December 01, 2006 at 10:54 AM
installing a remote starter ..... what is the wiring diagram for that vehicle and where do i cut for the relay???? please help ???
Posted By: KarTuneMan
Date Posted: December 01, 2006 at 11:22 AM
https://www.the12volt.com/installbay/forum_posts.asp?tid=61925 and where do i cut for the relay???? please help ??? I would suggest getting some real help from a live person in your area. -------------
Posted By: cjl1969ca
Date Posted: December 01, 2006 at 11:28 AM
ha ha ha so true ive installed before but not on the pass lock before just wondering where to put the by pass
Posted By: Hymer
Date Posted: December 01, 2006 at 11:44 AM
Wat bypass and rs unit?
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: blorkowski
Date Posted: December 01, 2006 at 1:24 PM
If you have a data port plug for OBD II under the dash on the drivers side, you will need an adapter module to bypass the anti-theft system thru the trucks data buss. My 04 GMC has a Passlock II system, I used a DEI 457GW bypass module and it worked fine. Connect to data buss only (not the passlock wires in the steering column) and put a diode in the ground wire from the unit (stripe on diode toward the ground connection).
-------------
Bill Lorkowski
Posted By: Velocity Motors
Date Posted: December 02, 2006 at 10:15 AM
You can use the databus modules or the standard wiring modules to bypass the Paslock II systems on these trucks.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|