AstroFlex 1000 Remote Programming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86497
Printed Date: May 11, 2024 at 8:19 PM
Topic: AstroFlex 1000 Remote Programming
Posted By: Velocity Motors
Subject: AstroFlex 1000 Remote Programming
Date Posted: December 01, 2006 at 2:41 PM
Need the remote programming instructions for the AstroFlex Series 1000 if anyone has it
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Replies:
Posted By: Hymer
Date Posted: December 01, 2006 at 3:39 PM
If it has a hood pin, open hood , turn on ign step on brake, cycle ign 3 - 4 times lights will flash press start button on EACH remote to be programed. Or dip switch 8 up press brake and hold start button on each remote to be programed [old and new] erases all codes in memory... lights will flash with each remote being accepted...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Hymer
Date Posted: December 01, 2006 at 3:41 PM
If ya do the dip switch method, after the remotes get programed, all dips down, step on brake... exits programing mode...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Velocity Motors
Date Posted: December 01, 2006 at 5:07 PM
Thanks Dude... much appreciated.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|