asianwolf 8000rs Door Lock Ford F350 2003

I have a Ford F-350 2003 Superduty that I am installing an asianwolf 8000rs or galaxy 5100rs-2w in. Everything went smoothly except for the door lock and unlock options. Haynes or Chilton does not have a manual for the 2003 (I've emailed them directly and that was thier response). My truck does not have a factory keyless entry installed in it. I tapped into the Pink and Yellow and Pink and Light green wires from the kick panels and it does nothing. I've check both the alarm unit and trucks wires for voltage with a Digital Multi-Meter and there is a voltage there. I believe according to the alarm manual it provides a neg. voltage and the truck needs a pos. voltage. I've done the reverse polarity relay according to this site but still no good. Any help would be greatly appreciated. This is my only hang up.

Thank you in advance.

Power Lock
Notes: Without keyless entry use pink / YELLOW for lock and pink/lt. green for unlock. They are 5 wire reverse polarity mastered from the driver switch and found in either kick panel. With keyless entry use WHITE/ red for lock and BLACK/ white for unlock. They are negative trigger and found at the VSM.
Power Unlock
Notes: Without keyless entry use pink / YELLOW for lock and pink/lt. green for unlock. They are 5 wire reverse polarity mastered from the driver switch and found in either kick panel. With keyless entry use WHITE/ red for lock and BLACK/ white for unlock. They are negative trigger and found at the VSM. On the vehicles with keyless entry the GEM shuts down after the doors have been locked for a certain time period, to wake up the system refer to DirectFax document 1094.

 

-------------
Mike M2
Tech Manager
CS Dealer Services

Mike M2,

Thank you for the wiring and clarity. This worked out perfect. Thank you again!