2006 Cobalt missing harness?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86534
Printed Date: May 02, 2025 at 6:02 AM

Topic: 2006 Cobalt missing harness?

Posted By: lanman31337
Subject: 2006 Cobalt missing harness?
Date Posted: December 02, 2006 at 1:56 PM

Hi, i'm putting a pkg7 into a 2006 cobalt. It has the harness for r-code, but it's missing the 5 pin harness with the RED / white and green wires i need for the 12 volt output and data output. Do I need these wires? It doesn't have keyless entry, if that helps. Or is this harness hidden somewhere and i'm totally missing it?

Replies:

Posted By: sparkie
Date Posted: December 02, 2006 at 3:30 PM

You aren't looking close enough. The black plug that has those wires in it, is there, but it isn't right next to the green plug.

-------------
sparky

Posted By: lanman31337
Date Posted: December 02, 2006 at 4:17 PM

I still can't find these wires for the life of me. Can you tell me the general area of this plug, like maybe what it's near?

Posted By: lanman31337
Date Posted: December 02, 2006 at 5:25 PM

Nm, it's an 05 cobalt. That probably makes a difference, and it's probably passlock 2.

Posted By: sparkie
Date Posted: December 03, 2006 at 12:19 PM

Yup. The PKG7 module won't work on a 2005. You need a module like a PLXR that does Passlock II when the car has no starter wire.

-------------
sparky

Print Page | Close Window