Bw 10000 immobiliser wiring
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86557
Printed Date: May 12, 2025 at 7:36 AM
Topic: Bw 10000 immobiliser wiring
Posted By: rowdyjim
Subject: Bw 10000 immobiliser wiring
Date Posted: December 03, 2006 at 5:14 AM
Replies:
Posted By: mauri197
Date Posted: December 03, 2006 at 10:09 AM
Posted By: rowdyjim
Date Posted: December 03, 2006 at 6:15 PM
alarm is bw 10000 ( black widow )- Black wired -installed into a 95 honda civic. I have everything installed central locking door switches etc... I have only the the immobiliser side of things to go. the alarm module has two sets of two cables labeled imob. both sets and both cables are black.
The manual says: This is the relay normal open 30a dry contact circuits. Cut and connect to an appropriate isolating Circuit. switched 12 volts, max 30amps.
Do i just cut the ignition wire and join meaning it has a relay in the unit
Both sets of wires have no voltage and dont ground?
Hope this makes any sense 