2004 nissan quest, transponder ring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86574
Printed Date: May 14, 2025 at 7:33 PM

Topic: 2004 nissan quest, transponder ring

Posted By: mauri197
Subject: 2004 nissan quest, transponder ring
Date Posted: December 03, 2006 at 1:32 PM

hey guys does anybody have any tips on mounting the transponder ring from the u module on this car or have any tips on this car tanx

-------------

Replies:

Posted By: prdjr165
Date Posted: December 03, 2006 at 4:04 PM

One of the easiest vehicles I've ever done,Plenty of room under the dash.Just make sure the bypass ring is secured well!

Posted By: Chris Luongo
Date Posted: December 03, 2006 at 5:35 PM

Nissans aren't at all fussy about ring placement.

Pop off the circular trip around the keyhole, find a little crack where you can drop the wiring for the ring into the hole and let it fall down under the dash where you can get to it.......put the ring around the key cylinder practically any way you like, and put the factory trim ring back on....... most likely, it'll work on the first try without trouble.

Posted By: mauri197
Date Posted: December 03, 2006 at 7:47 PM

tanx fellows

Print Page | Close Window