Print Page | Close Window

’02 continental, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86625
Printed Date: May 09, 2025 at 8:53 PM


Topic: ’02 continental, remote start

Posted By: mxxmikexx
Subject: ’02 continental, remote start
Date Posted: December 04, 2006 at 12:33 PM

will the factory alarm trip if you remote start w/o hooking up the diasrm wire in the drivers door? im trying to avoid having to run wires into the drivers door, i dont have the car yet so im just posting to see if anyone knows for sure either way!

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106



Replies:

Posted By: chadwa2003
Date Posted: December 04, 2006 at 4:01 PM
You may be able to program unlock before and lock after start or hook up a key sense wire one of those usually work



Posted By: Mike M2
Date Posted: December 04, 2006 at 4:03 PM

I'm not familiar with the Continental, but Most Ford products need a disarm wire connected. What RS are you installing? Here's what Directed has...

Factory Alarm Disarm dk. GREEN/ purple   -  drivers door module
Notes: The drivers door module is located in the drivers door and is attached to the door switches.



-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: cavsfan
Date Posted: December 04, 2006 at 4:18 PM
From what I can remember it will not. It should disarm with just the pats bypass.


Print Page | Close Window