Print Page | Close Window

armed but alarm gets triggered

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86655
Printed Date: July 01, 2025 at 11:53 PM


Topic: armed but alarm gets triggered

Posted By: mrmiskel
Subject: armed but alarm gets triggered
Date Posted: December 04, 2006 at 11:11 PM

Hi,

I searched for a familiar thread but I had no luck. If someone knows a link to a thread similiar to what I'm asking please post it to avoid rule breaking. Thanks.

I had a shop install my alarm (Audio Lab In Marysville, WA). I have the Commando FM-5005. I reprogrammed the alarm to default settings. I then programmed the FM Transmitter (#22) to Module learn and then I programmed it to Remote learn. Is there a next step to program becasue when I go to arm the alarm the sirens blare as if it were triggered rather than 1 chirp to indicate that the alarm is set.

Has anybody had this problem and can kcik over some help this way please!!

Thanks!




Replies:

Posted By: OhioMike1101
Date Posted: December 05, 2006 at 8:16 AM
why not take it back and cough up some troubleshooting dough to have it put back correctly? You did buy the alarm from them correct?

-------------
South Side Audio
2501 S. High St
Columbus, OH 43207




Print Page | Close Window