Print Page | Close Window

1995 Honda Accord LX

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86684
Printed Date: April 28, 2024 at 5:54 PM


Topic: 1995 Honda Accord LX

Posted By: evenstar
Subject: 1995 Honda Accord LX
Date Posted: December 05, 2006 at 7:52 PM

OK I have a Clifford Matrix RSX 3.5 and I have no idea where the heck to put all these wires. The manual doesnt say exactly where to put the wires. Am I suppose to strip the car or something? Do I just mount the wires anywhere in the car? How do I get the wires through the firewall in the engine bay?

Sorry I have never installed a car alarm before and I'm frustrated installing this. I literally have no experience doing this. I called the shops around here but they are charging $1,000+ for installation. Help!



Replies:

Posted By: Twelvoltz
Date Posted: December 05, 2006 at 7:57 PM
$1,000 for install?

Call around, there are plenty of shops that would do it for WAY less than that. If you are not sure about the basics of installation, it may be a better idea to just pay someone to put it in.

Where do you live? Maybe someone on this site is in your area and would be willing to put it in for you.




Posted By: evenstar
Date Posted: December 05, 2006 at 8:49 PM
I live in California, but if there isnt any luck for me.. I prefer the installation to be done by a shop. I may call again tomorrow morning to see any shops around here for a cheaper price.

Btw, how long would it take them to install the Clifford RSX 3.5 alarm? I honestly dont like them having to tell me to leave and calling me back once the alarm is in. There is always something fishy going on with these shops most of the time.





Print Page | Close Window