2005 mazda 3, alarm, locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86685
Printed Date: May 14, 2024 at 6:59 PM
Topic: 2005 mazda 3, alarm, locks
Posted By: maxcat
Subject: 2005 mazda 3, alarm, locks
Date Posted: December 05, 2006 at 8:13 PM
Hey all, just wondering if someone can clear this up for me. Have been reading the posts on the 2005 Mazda 3, and there seems to be some different info on the locks. Can anyone tell me if the lock and unlock wires will arm and disarm the factory alarm,or will the factory arm and disarm wires work the locks as well. Or do you need to do the 4 connections using both the lock/unlock wires and the factory arm and disarm wires. Hope that question did not sound to confusing, and any help would be appreciated. Thank-you in advance
Replies:
Posted By: Twelvoltz
Date Posted: December 05, 2006 at 8:23 PM
DEI lists:
Factory Alarm Arm BLACK/ blue - driver kick, door harness
Notes: Meter this wire while turning the key in the driver door key cylinder.
This wire may also lock the doors.
Factory Alarm Disarm BLACK/ white - driver kick, door harness
Notes: Meter this wire while turning the key in the driver door key cylinder.
This wire may also unlock the doors.
Evidentially there are different versions of the car that some will and some will not arm/disarm with. If you are trying to do the least amount of work, try using the arm disarm wires, if the doors lock and unlock you are done. If they do not, you will have to do four wires.
Posted By: maxcat
Date Posted: December 05, 2006 at 8:57 PM
Thanks, Twelvoltz, that is the exact info I was looking for. Thank you for the reply
Posted By: maxcat
Date Posted: December 20, 2006 at 5:58 PM
Hey All, Could anyone tell me if All 2005 Mazda 3's have factory alarm. I know they have anti theft but was curious if they are indeed equiped with factory alarm as well. Is the best way to just lock the doors, reach in and open a door to see if the horn sounds. Any help or insight would be greatly appreciated. Thank-you in advance
Posted By: 05gt
Date Posted: December 21, 2006 at 12:27 AM
just lock the doors from the remote, let it sit for about 10 secs, reach in and open the doors, if the horn sounds then you have a factory alarm 
|