Door Locks 92 Mercury Sable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86722
Printed Date: May 18, 2024 at 12:46 AM

Topic: Door Locks 92 Mercury Sable

Posted By: azn_fcuk
Subject: Door Locks 92 Mercury Sable
Date Posted: December 06, 2006 at 1:36 PM

Hi everyone,

Ok i understand that the door locks on thi vehicle are reverse polarity.

Now when triggering the locks will my relay set up be like this https://www.the12volt.com/images/actuatorrevpol.gif

where Lock pin 30 will goto pink / YELLOW and Unlock pin 30 will goto pink/lt.green

thanks

Replies:

Posted By: Big Dog
Date Posted: December 06, 2006 at 2:50 PM

No.

Use 5 Wire Alternating 12 Volts Positive Door Locks to interface with the OEM system, like this https://www.the12volt.com/doorlocks/page3.asp#5w

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: azn_fcuk
Date Posted: December 06, 2006 at 3:26 PM

ok now this is a sable, with our keyless entry but has power door locks.

So use the 5 wire relay setup then?

Posted By: Big Dog
Date Posted: December 06, 2006 at 3:33 PM

Five-wire for non-keyless, negative-pulse for the keyless (OEM transmitter) versions.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: thepencil
Date Posted: December 06, 2006 at 3:36 PM

MERCURY, SABLE, 1992, Power Lock

Five-wire for non-keyless, negative-pulse for the keyless versions.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: azn_fcuk
Date Posted: December 06, 2006 at 3:38 PM

thanks guys !!!!!!!!

Print Page | Close Window