Quick window module ???

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8693
Printed Date: June 10, 2024 at 1:55 AM

Topic: Quick window module ???

Posted By: cavyinthegarage
Subject: Quick window module ???
Date Posted: January 27, 2003 at 11:33 PM

Hello,

I bought a one touch window express kit from autoloc... It only has a diagram for one window up or down... however I would just prefer 2 windows down instead of one up and one down.. so I wired everything up switch wise and it works perfect... but when I hook it up to the alarm it has 2 negative inputs.... so I spliced both wires, wraped them together and but connected it with the alarms negative input...

well it doesnt work that way.. I had to cut one of the inputs to make just one window go down... do I have to put a diode on both of the window modules inputs to get it to work?

any help will be appreciated....thanks shawn

Replies:

Posted By: Velocity Motors
Date Posted: January 28, 2003 at 10:36 AM

I would diode isolate the two inputs with the cathode band facing the window switch and the anode side facing the alarm system. Use a 1N4001 1 amp diode and this should be more than enough.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: cavyinthegarage
Date Posted: January 28, 2003 at 10:04 PM

Thanks Jeff.... your advice is always welcomed....

-------------

Posted By: Velocity Motors
Date Posted: January 28, 2003 at 11:18 PM

Please post your results & no problemo.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA