programming Compustar 2WSS-AS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86934
Printed Date: July 14, 2025 at 9:24 AM

Topic: programming Compustar 2WSS-AS

Posted By: High4volts
Subject: programming Compustar 2WSS-AS
Date Posted: December 09, 2006 at 4:53 PM

i am trying to program Optional output for button #2 on my CompuSTAR to stay latched. I did like tha manual said but it still just toggles. Any tips to help make this work? LIke the 1 way transmitter or 2 way?

Replies:

Posted By: chadwa2003
Date Posted: December 09, 2006 at 9:09 PM

You could use a compuprogrammer it's designed for them it's the easiest way but you need to go to a dealer for one

Posted By: High4volts
Date Posted: December 10, 2006 at 1:41 PM

Do they usually charge people for this?

Posted By: chadwa2003
Date Posted: December 10, 2006 at 1:47 PM

Maybe like 5 bucks or so. Not really sure i've never had anyone come and ask for me to do this for them. But i don't think they would depends on the shop owner though

Posted By: High4volts
Date Posted: December 10, 2006 at 1:56 PM

what remote do you use to do the programming? the 2 way or the 1 way remote? which is the easiest? I'm gonna try again in a few.

Posted By: High4volts
Date Posted: December 10, 2006 at 7:19 PM

figured it out after holding buttons 1 & 4 then pressing button 4 6 times I wasn't waiting for the lights to flash 6 times then press 2.

Print Page | Close Window