Old control box
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86938
Printed Date: June 09, 2024 at 4:33 AM
Topic: Old control box
Posted By: onequikss
Subject: Old control box
Date Posted: December 09, 2006 at 6:25 PM
Ok heres the deal I had a old alarm in a 1987 k5 chevy blazer when I got it it had no remote I never used it but now that the truck is getting restored I wanna put the new alarm in. I know how to do everything on the new alarm since I have now done a few dozen.
My problem is whoever put this alarm in did a really bad job wires run all over the place and I feel tracing them all out will take a while However if someone had a diagram for the old alarm it may help alot. I took the box out and its old It has the numbers 1024 D on a little sticker outside and also on the ic chip inside. The box has 2 pigtails each contain 9 wires "18 total" Also it has an antenna wire. The board has 740-2 etched into it. I took a few pictures if that helps. also when the box is removed the truck willnot start it also controls electric door locks. Any help I would be greatfull Thanks
Replies:
Posted By: onequikss
Date Posted: December 10, 2006 at 10:29 AM