2006 toyota solara remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86957
Printed Date: May 15, 2025 at 1:49 AM

Topic: 2006 toyota solara remote starter

Posted By: keysersoza
Subject: 2006 toyota solara remote starter
Date Posted: December 10, 2006 at 7:30 AM

I am installing a remote starter on a 2006 Toyota solara using a crimestopper rs-1304 I have already used my second ignition wire and this vehicle has two starter wires. Which wire can I use for the second starter wire and how do I wire this up or can I just use a diode any iformation would be appreciated. Also I have already used my yellow/black wire for the bypass module.

Replies:

Posted By: Mike M2
Date Posted: December 10, 2006 at 8:05 AM

You need a relay , 30 to 12volts, 86 to ground, 85 to the first starter wire, 87 to the second starter wire, 87a not used.

posted_image

I'm guessing the yellow/black is a statis output? If so, you will need to split the wire with two diodes(band towards the alarm brain), one to your bypass and the other to the keysense wire(to disarm the factory alarm).

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: keysersoza
Date Posted: December 16, 2006 at 7:45 AM

Thanks worked fine.

Print Page | Close Window