06 silverado, remote start w/GM-SL
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86964
Printed Date: July 07, 2025 at 1:58 PM
Topic: 06 silverado, remote start w/GM-SL
Posted By: ceasar326
Subject: 06 silverado, remote start w/GM-SL
Date Posted: December 10, 2006 at 11:17 AM
Im new on this forum thing, ive try reading all the information about the problem that am having with my 06 chevrolet silverado,. Am installing a remote start w/GM-SL. First of all this is my first time dealing with a bypass module interface, ive started installing the alarm/remote start with out the GM-SL, i would start the truck with the remote start and it would start but it would die after a second or 2.Ten ive try installing the GM-SL to bypass the key turn on but still would do the same. Am i missing a wire to install. I really need some help.. Thanks!
Replies:
Posted By: splaudio
Date Posted: December 10, 2006 at 8:11 PM
Posted By: Velocity Motors
Date Posted: December 10, 2006 at 8:20 PM
The GM-SL is a Fortin peice. Just make sure that you have the PURPLE wire in the C1 connector attached to the PURPLE OBDII wire at the diagnostics connector and program the module properly. Aside from this, the only real connections that are mandatory are the IGNITION, 12 +, GROUND & Status wire from the remote starter.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ceasar326
Date Posted: December 10, 2006 at 11:40 PM
Well as far as the connection goes i have the purple wire connected to the OBDII pin 2. The module works cuz the unlock and lock wires work buti dint checkif theres current on the ignition wire from the C1 so ill try testing it and try again!. For any other tip on how to make this work please help!
Posted By: tech2uned
Date Posted: December 11, 2006 at 12:15 AM
Make sure that the status output wire is connected, or working(negative pulse during the remote start process).
Posted By: ceasar326
Date Posted: December 11, 2006 at 9:44 AM
I haven plug the blue wire witch is (ground in) that gets connected to anegative pulse when the truck starts? Orwat typeof wire should i use for the ground in?
Posted By: brhaugen
Date Posted: December 11, 2006 at 9:55 AM
Most remote starters have a "Status" output witch is a negitve while the R-S is active. On DEI and Audiovox they are blue.
|