1997 Range Rover, Autopage 727

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86975
Printed Date: May 03, 2024 at 11:11 PM

Topic: 1997 Range Rover, Autopage 727

Posted By: Uniqueauto
Subject: 1997 Range Rover, Autopage 727
Date Posted: December 10, 2006 at 5:03 PM

I have a customer with a 1997 Range Rover and I am installing a Autopage 727 Alarm/Starter and for some reason my ign wire cranks the starter after a few seconds. The only problem is that it keeps it engaged when your giving neg to the wire. I guess you can call this truck a nightmare. In the process of trying to figure this out I now have the Check engine and Airbag light blinking. I tried to reset by disconnecting the batt for about 5mins but it didn't work. If anyone has done a remote start on this truck please let me know if there is a trick or something. I will be finishing the truck on Monday. Almost 25 remote starts since dec. 1 and this one has me going crazy.

Thanks

-------------
Installer/Owner

Double check twice Install once!
Wires are my Best Friends

Replies:

Posted By: Uniqueauto
Date Posted: December 11, 2006 at 7:46 AM

Has anyone even done a remote start on this truck? Wiring says everything is neg but I just can't figure out why the ign wire also cranks the starter?

-------------
Installer/Owner

Double check twice Install once!
Wires are my Best Friends

Posted By: mauri197
Date Posted: December 11, 2006 at 7:01 PM

i havent done a range rover but heres a suggestion how bout if you try to isolate the ignition wire from the switch you might be getting a feedback threw the ignition switch when the truck is running just a thought