diy rattler 369d on 2000 tacoma
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87044
Printed Date: May 15, 2024 at 2:45 AM
Topic: diy rattler 369d on 2000 tacoma
Posted By: hla.2
Subject: diy rattler 369d on 2000 tacoma
Date Posted: December 11, 2006 at 7:51 PM
I have attempted to install this remote start on my tacoma. I cannot get it to do anything. I have checked all the wires 3 times. I am having trouble w/ door locks. But even though, the module makes no noise whatsoever. I have checked the volts on all ignition wires; they are good. Checked my ground; good. Installed hood safety, nuetral ground, and brake switch. The only other wires connected are parking lights and tac. At one time while doing the locks it did start clicking w/o pressing button but then quit. Could someone help please.
-------------
HA
Replies:
Posted By: hla.2
Date Posted: December 16, 2006 at 3:42 PM
I have a 2000 toyota tacoma. I have attempted to install a diyrattler 369d remote start on my tacoma. I cannot get it to do anything. I have checked all the wires 3 times. The module makes no noise whatsoever. I have checked the volts on all ignition wires; they are good. Checked my ground; good. Installed hood safety, nuetral ground, and brake switch. The only other wires connected are parking lights and tac. At one time while doing the locks the module did start clicking w/o pressing button but then quit.
Posted By: Mike M2
Date Posted: December 16, 2006 at 3:53 PM
Are you sure the antenna is plugged in correctly?
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: hla.2
Date Posted: December 17, 2006 at 11:07 AM
I just checked it. It is all the way in and the right way.
|