Print Page | Close Window

2000 Chevy Tahoe, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87092
Printed Date: May 13, 2025 at 7:49 PM


Topic: 2000 Chevy Tahoe, remote start

Posted By: bruno serre
Subject: 2000 Chevy Tahoe, remote start
Date Posted: December 12, 2006 at 3:45 PM

Security light on after starting with remote.  Using Triologic DTS8122 & PLXR xpress bypass kit, Green key sense wire is hooked up, White & Brown 2nd & 3rd ign also hooked up, but after starting with remote security light comes on after inserting key and touching brke pedal ( disengaging remote ) normal start with key , the security light is normal ( off )

Any Help would be appriciated.

Thank you in advence




Replies:

Posted By: xtremej
Date Posted: December 12, 2006 at 3:51 PM

Did you program bypass for pass II? When programming bypass make sure you have the brown wire disconnected from the plxr, I know it sounds dumb but it causes issues with them sometimes. Try it with the keysense wire un-hooked . And also what wire do you have the black wire from the plxr going to? and the blue from the plxr?



-------------



Posted By: au5599
Date Posted: December 12, 2006 at 7:38 PM

make sure it is wired like this

blue - passlock yellow

purple- yellow start wire

pink- pink ignition wire

red- red 12 volt wire

green- light green  keysense wire

black- good ground

program to passlock II they come set for #3 passlock II saturn ION they are totally different.



-------------
Street Dreams Car Club
93 GRAND CARAVAN SE / Astro
Team New York SS3-4 06 & SM3-4 07 DB Drag World Finals
2003 Chevy Suburban LT / 98 GTP



Posted By: bruno serre
Date Posted: December 15, 2006 at 8:33 AM

hooking up purple to start & pink to ign,  keeps the security light off (even though the instructions claim these wires are hooked up for passlock 1)  Thanks to au5599 for the response.



-------------
Bruno /Bruno's Auto Repairs


Print Page | Close Window