561T Problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87178
Printed Date: May 01, 2025 at 2:11 PM

Topic: 561T Problem

Posted By: megatfauzi76
Subject: 561T Problem
Date Posted: December 14, 2006 at 1:03 AM

Hai

I just install my Valet 561T to my car. My problem in the morning. After the car rest for the whole night, normally it take a bit time to start.

My 561T cranking my engine once i press my remote button, but it fails to start. My signal blinking show that its llike my engine already start.

I wait for 3 minute either the 561T try to start again. But nothing happen.

What sholud I do? Ist correct the 561T will try to start the engine again automatically if it fails to start at the first try?

Thank You

Replies:

Posted By: Mike M2
Date Posted: December 14, 2006 at 6:33 AM

Since we don't know what kind of car you have i doubt there's much we can tell you....

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: mobilecustoms
Date Posted: December 14, 2006 at 3:56 PM

please post make and model of the car

-------------

Posted By: megatfauzi76
Date Posted: December 14, 2006 at 6:41 PM

Mine is toyota vios...I already take out my factory immobolizer....Because my new alarm already have built in anti hijack n immobolizer...For your info, my alarm and auto start is separate module....

Any idea why i facing thos problem?

Thank You

Posted By: mobilecustoms
Date Posted: December 14, 2006 at 7:49 PM

could it be the starter kill of the alarm being a problem

-------------