Print Page | Close Window

autopage alarm problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87275
Printed Date: May 16, 2025 at 12:36 AM


Topic: autopage alarm problems

Posted By: airshives23
Subject: autopage alarm problems
Date Posted: December 16, 2006 at 12:48 AM

hey guys,

i just bought a autopage rs660 remote start/keyless setup for my g/f's car.

the problem i am having is when i first went to install the thing, i hooked up the main module's power/ground/siren etc. harness to get power to the unit.  but i could NOT get anything.  the wires are getting juice, but the module is dead.  i have NO LED action at all.  i tried hooking it up straight to the battery for juice, still nothing, and i even tried to hook it up to my car, and nothing.  the wierd thing is when the power/ ground are hooked up, the shock sensor turns on, but the main harness and LED are dead, no activity.

am i doing something wrong?

is there anything else i can do to test to see if this is a dead unit?




Replies:

Posted By: 05gt
Date Posted: December 16, 2006 at 1:34 AM
I think on that unit you have to program the remote first????


Print Page | Close Window