Alarm going off when I hit the brakes
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87316
Printed Date: April 25, 2024 at 6:40 PM
Topic: Alarm going off when I hit the brakes
Posted By: npb4me
Subject: Alarm going off when I hit the brakes
Date Posted: December 16, 2006 at 7:36 PM
06 GMC Sierra, Viper 5900, DEI 457G. When I press on the brake pedal is it setting off the alarm. When I let off the pedal, it all stops. Other then this, everything else works perfect.
Replies:
Posted By: enihcamxes4you
Date Posted: December 16, 2006 at 8:11 PM
is your + trigger wire for the doors accidently hooked up to the brake pedal. that happened to me before due to the fact the colors were similar.
------------- Lenny Jenkins
MECP First Class Installer
6 years
Posted By: npb4me
Date Posted: December 16, 2006 at 11:18 PM
enihcamxes4you wrote:
is your + trigger wire for the doors accidently hooked up to the brake pedal. that happened to me before due to the fact the colors were similar.
No, I have everything unplugged except the main harness to the viper and it still sets off the siren.
Posted By: Fastlearner
Date Posted: December 17, 2006 at 5:21 AM
did anyone else touch your car while you were one lunch or anything, cause it sounds like a joke from another installer.
Posted By: Twelvoltz
Date Posted: December 17, 2006 at 6:20 AM
I am with Fastlearner on this one, this is actually a classic prank.
Posted By: npb4me
Date Posted: December 17, 2006 at 11:09 AM
Fastlearner wrote:
did anyone else touch your car while you were one lunch or anything, cause it sounds like a joke from another installer.
No, my truck is in my garage. No one else has looked at it. Today I am going to reground the alarm and tap a diferent power source to see if this changes anything.
Posted By: Fastlearner
Date Posted: December 17, 2006 at 11:19 AM
Is this a remote start to or no.
Posted By: npb4me
Date Posted: December 17, 2006 at 11:34 AM
Fastlearner wrote:
Is this a remote start to or no.
Yes, and it works. Everything works, just can't figure this out.
Posted By: Fastlearner
Date Posted: December 17, 2006 at 11:35 AM
Whats the alarm model
Posted By: npb4me
Date Posted: December 17, 2006 at 11:54 AM
npb4me wrote:
06 GMC Sierra, Viper 5900, DEI 457G. When I press on the brake pedal is it setting off the alarm. When I let off the pedal, it all stops. Other then this, everything else works perfect.
Posted By: mando2155
Date Posted: December 17, 2006 at 10:44 PM
your brake input wire is a thin gauge brown and your siren output is a brown just not as thin, any chance you accidentaly hooked you siren to your brake wire?
Posted By: npb4me
Date Posted: December 17, 2006 at 10:52 PM
No, I triple hecked that. I moved my ground and power wires to new loctions and all is fine. Guess the fuse panel is not a good place to go.
Posted By: enihcamxes4you
Date Posted: December 18, 2006 at 12:30 AM
yes a bad ground would definetly cause an alarm to go haywire. grounds are very very important.
------------- Lenny Jenkins
MECP First Class Installer
6 years
|