Print Page | Close Window

homelink transmiter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87429
Printed Date: July 12, 2025 at 8:15 AM


Topic: homelink transmiter

Posted By: jfreez
Subject: homelink transmiter
Date Posted: December 18, 2006 at 5:55 PM

I am buying a new car with homelink..

I want to know how to build a cheep system to use one of the homelink buttons to turn a realy to constant on, then by pressing the same button turn the relay to constant off.

It is for the new corvette Z06, there is an exhause baffel that is opened when power is cut to the solinoid. so I want to control that at its fuse using the homelink garage door control.




Replies:

Posted By: jfreez
Date Posted: December 19, 2006 at 10:49 AM
I am thinking of getting a receiver from homlink to do this, I just cant figure out how to get it to stay on from the pulse and then off from the pulse.




Posted By: jfreez
Date Posted: December 19, 2006 at 3:53 PM

anyone have any ideas?????





Posted By: jfreez
Date Posted: December 19, 2006 at 4:15 PM

here is the product I am trying to replacate, https://www.westcoastcorvette.com/ps-1226-163-c6-z06-mild-to-wild-exhaust-control.aspx

if you read the discriprion, the remotes are not needed, just the homelink buttons on the rear view.

I think I can do it with somthing like this, https://www.aaaremotes.com/mu12vgaorgad.html just how do I get it to stay on or off at will?






Print Page | Close Window