Print Page | Close Window

1995 Infiniti G20, remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87462
Printed Date: July 17, 2025 at 4:10 PM


Topic: 1995 Infiniti G20, remote start

Posted By: shawn007
Subject: 1995 Infiniti G20, remote start
Date Posted: December 19, 2006 at 5:41 AM

I have a 1995 Infiniti G20. I bought this Aolin Remote starter 838 from ebay. The funny thing is that it is not even a american company and they dont have a english website. Their manual does not give information like other compnies do which seem to break down the wireing diagram and tell you where each wire from the main frame goes.  All they give me is this stupid diagram that just confuses the hell out of me. without telling me what is the function of each of these wires. I guess the biggest problem for me is the bottom of the diagram and the central locking wires.

Here is a link to a pdf file where the manual is https://www.samitoelectronics.com/al838s/AL838SR_manual.pdf' . It will be on Page 6.

My vechial diagram is here https://www.directwholesale.net/diagrams/printpage.asp?ModelID=19019&MakeID=22

I guess Since I have a hard time reading this diagram can someone help me figure out which wires go to the following.

Start (My car has 2 start wires)

Ignition

Accessory

Break Light

Tach Signal                         Purple+

Parking Lights                     Brown+

12 volt constant

Oem Alarm Disarm

Dome Lights/Superv

OEM Horn                            Pink+

Power lock

Power unlock

Trunk Release                  RED / BLACK

Alarm input wire

-----

Also is the central locking the same thing as the door positive and negitve trigger? Do they connect to the same place?

How do I disarm the factory alarm or will it be disarmed from the door triggers?

Where would I put these relays? How many do I need? This diagram shows I need 2 relays for the ignition?

I am sorry if this seems stupid I am new to this.




Replies:

Posted By: KarTuneMan
Date Posted: December 19, 2006 at 8:17 AM
I tried your link to the PDF....it broke the internet.?

-------------




Posted By: shawn007
Date Posted: December 19, 2006 at 5:57 PM

Your right. When I click the link I get the message that it broke the internet. If I copy and paste the link it works. I tried to retype the link so maybe it will work now.

Manual Page 6 https://www.samitoelectronics.com/al838s/AL838SR_manual.pdf

Diagram https://www.directwholesale.net/diagrams/printpage.asp?ModelID=19019&MakeID=22






Print Page | Close Window