Print Page | Close Window

2006 Dodge Dakota Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87492
Printed Date: April 28, 2024 at 4:27 AM


Topic: 2006 Dodge Dakota Remote Start

Posted By: streetdream
Subject: 2006 Dodge Dakota Remote Start
Date Posted: December 19, 2006 at 1:56 PM

Never seen such a thing in my life. A 2006 Dodge Dakota remote start system, tech sheet says there is a - and + accessory wire. There has to be a way to integrate to this...but how. Directechs says it's easy, but my boss smoked a wire in a customer's vehicle last night doing it how they said to. Any ideas? Thanks guys.

-------------
MECP First Class
Bay Manager



Replies:

Posted By: russ lund
Date Posted: December 19, 2006 at 4:58 PM

I took the 2nd accy from my starter and used it to power and control a relay to make a - signal.

PIN 86 TO 2ND ACCY ON r\s   Pin 85  and 30 to ground   Pin 87 to  - accy wire on truck.  Russ.



-------------
BigDog




Posted By: Hymer
Date Posted: December 19, 2006 at 5:08 PM
Lots of dodges are like that.. (-) accy (-) starter.. stupid dodges... at least you have an easy one!

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair




Posted By: splaudio
Date Posted: December 19, 2006 at 7:35 PM
did ya find out why the wire smoked? i am curious too...





Print Page | Close Window