How to program subaru keys

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87507
Printed Date: June 12, 2024 at 12:22 AM

Topic: How to program subaru keys

Posted By: xtremej
Subject: How to program subaru keys
Date Posted: December 19, 2006 at 6:10 PM

I have a customer with a 2005 subaru legacy 2.5gt it has a transponder key. He had no owners guide and the dealership will not tell me if I can program a 3rd key off of the first 2. I need to know if it can be done and if so the procedure. This will be greatly appreciated.

Just a foot note was going to use the subdl-pk but after receiving them I find you need a subaru scan tool to assist in programming the transponder part of the bypass. Is it beer thirty yet?

-------------

Replies:

Posted By: JWorm
Date Posted: December 19, 2006 at 8:07 PM

You need a Subaru scan tool to program the module. Without one, you are out of luck. The customer should have received 3 keys if they bought the car new. 2 regular keys and a valet key.

Posted By: xtremej
Date Posted: December 20, 2006 at 7:44 AM

He says he bought it new nad they only gave him 2. I will try to find someone to loan me a scan tool today, thanx.

-------------

Print Page | Close Window