Command Start 2400

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8755
Printed Date: July 15, 2025 at 10:37 AM

Topic: Command Start 2400

Posted By: Brad Eyben
Subject: Command Start 2400
Date Posted: January 29, 2003 at 9:01 AM

Could somebody please post or direct me to a wiring guide and programming guide for the CS 2400 starter. I know it's old but heh its laying on my bench looking mournful ;)

Replies:

Posted By: Velocity Motors
Date Posted: January 29, 2003 at 9:22 AM

Command Start CS2400/2500 Installation Diagram

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: PLAYER69
Date Posted: January 29, 2003 at 9:29 AM

Just so you are aware, the range will be terrible on that especially if you are installing it in a gm vehicle with factory keyless entry.

Posted By: Brad Eyben
Date Posted: January 29, 2003 at 9:40 AM

Thanks Guys,

That was incredibly quick response. I think I'll put it in a 92 Bronco, mostly cause it's there.

Any help on programming that one? Particularly the aux for the locks?

Thanks

Posted By: savaDUST
Date Posted: February 09, 2003 at 8:25 PM

Does anyone know how to reprogram the remote to the main unit? I changed the battery in my truck and in the remote at the same time and can't get my Command Start 2400/2500 to work again. Thanks in advance, and any information is appreciated.

Posted By: PLAYER69
Date Posted: February 10, 2003 at 4:50 PM

open the hood, park lights will go on but wait for them to go off.

Hit the hood switch once, lights will come on.

While lights are on press hood switch again and lights will stay on.

Press button one on transmitter untill lights go off and close hood.

Your done

Print Page | Close Window