Print Page | Close Window

remote start problems, 96 Explorer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87578
Printed Date: May 03, 2024 at 2:51 PM


Topic: remote start problems, 96 Explorer

Posted By: 5kwatts
Subject: remote start problems, 96 Explorer
Date Posted: December 21, 2006 at 1:22 PM

hi i have a 96 Ford Explorer with a chapman CSM-2.5 remote controlled car starter and like a month ago the truck started makin a weird clicking sound and i took it to HORIZON AUDIO and they told me that a "relay was sticking"? its like the truck is trying to start when the keys are not in the ignition or when i dotn press the start button.  any ideas ?



-------------



Replies:

Posted By: customak47
Date Posted: December 21, 2006 at 1:29 PM

It probably is a bad module. if it is causing problems, disconnect the module and install a new unit.



-------------
My rifle is my friend...



Posted By: 5kwatts
Date Posted: December 21, 2006 at 1:31 PM
maybe there is a way i can unhook the power wire so i can bypass it ?

-------------



Posted By: 5kwatts
Date Posted: December 21, 2006 at 1:33 PM
i have no idea how to unhook it. i got the owners manual for the remote starter.... so couldent i just unhook a power wire from the remote starter and go from there ?

-------------



Posted By: thepencil
Date Posted: December 21, 2006 at 1:37 PM
5kwatts wrote:

 hi i have a 96 Ford Explorer with a chapman CSM-2.5 remote controlled car starter and like a month ago the truck started makin a weird clicking sound and i took it to HORIZON AUDIO and they told me that a "relay was sticking"? its like the truck is trying to start when the keys are not in the ignition or when i dotn press the start button.  any ideas ?



You know the saying if it ain't broken...


So, what exactly is broken in your post? I don't quite know and understand what it is.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image



Posted By: 5kwatts
Date Posted: December 21, 2006 at 1:47 PM

ITS THE REMOTE STARTER I GUESS  IT IS TRYIN TO START THE TRUCK AND IM NOT PRESSING ANY BUTTONS AND THE KEYS ARNT EVEN IN THE IGNITION SO I JUST WANNA UNHOOK IT CUZ I DONT EVEN USE IT.... SO IS THERE A WAY TO DO THAT AND THE TRUCK WOULD STILL WORK OR NO?



-------------



Posted By: splaudio
Date Posted: December 21, 2006 at 3:17 PM
yes find the starter brain and unplug the power harness. power harness has 10-12gauge wire...



Posted By: 5kwatts
Date Posted: December 21, 2006 at 3:22 PM
i need the wire diagram of the ignition harness and where it is located please.

-------------



Posted By: splaudio
Date Posted: December 21, 2006 at 4:10 PM

the ignition harness us under the steering wheel. take off the plastic pannel below the wheel by ur shins.

12v+ PURPLE / red 15amp shold be ran to the battery

starter+  blue/white

ign+ WHITE/ orange

acc+ PURPLE / green

u dont need the keysence wire for remote start

u will also need a transponder bypass...




Posted By: Hymer
Date Posted: December 21, 2006 at 4:46 PM
just pull the fuses on the 12awg red wires, before ya go cutting wires.... that'll kill any power to the unit....

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair


Print Page | Close Window