Print Page | Close Window

96 blazerdoor lock not working with alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87594
Printed Date: May 03, 2024 at 11:33 AM


Topic: 96 blazerdoor lock not working with alarm

Posted By: joe61177
Subject: 96 blazerdoor lock not working with alarm
Date Posted: December 21, 2006 at 5:22 PM

I have a 96 chevy blazer and i added a prestige ats787 ive got everything working no problem . except the power door lock . i have factory pwr door lock  i need to intergrate the new alarm to work the door locks does anybody know if i need any relays or how to hook it up




Replies:

Posted By: mikvot
Date Posted: December 21, 2006 at 5:46 PM
it should be capable of either doing neg  or pos door locks.......it should say in the install manual...try the audiovox web site, if you cant find anything on it, than just use relays to be safe.             I'll see if i can find that model for you.




Posted By: Hymer
Date Posted: December 21, 2006 at 5:49 PM
Lite blue lock (+) white for unlock (+) @ the pass dash door lock relay bank.. If your unit has built in relays, no, you don't need to add external, if it doesn't [the manual should tell ya] then you do. Hook up as folows... hooking it up depends on what ya have for a trigger (+) or (-) off the alarm brain.. either way you need to get a 12v pulse to those lock / unlock wires and it will work...

-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair




Posted By: mikvot
Date Posted: December 21, 2006 at 6:00 PM

all i could find was an aps787, if this is the model, then no u don't need relays. take the green door lock wire of the alarm and send it to the lock wire he has listed above and the red door lock wire goes to the unlock above. the red black wire u don't need.





Posted By: joe61177
Date Posted: December 22, 2006 at 9:53 AM
thanks guys ill try that .




Posted By: mlaurenza
Date Posted: December 23, 2006 at 9:34 PM
If my memory serves me correctly I think the four door models are pos trigger but the two door models without factory keyless are 5 wire reverse polarity. 





Print Page | Close Window