Print Page | Close Window

Info for 03 Mazda B3000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87628
Printed Date: May 09, 2025 at 8:33 AM


Topic: Info for 03 Mazda B3000

Posted By: wheelzat27
Subject: Info for 03 Mazda B3000
Date Posted: December 22, 2006 at 6:50 AM

I'm looking for remote start wireing info for a 2003 Mazda B3000 pickup (standard transmission)

Thank you.




Replies:

Posted By: KarTuneMan
Date Posted: December 22, 2006 at 8:32 AM
What are you installing?

-------------



Posted By: wheelzat27
Date Posted: December 22, 2006 at 5:17 PM

A nordic start, for standards.




Posted By: ers1121
Date Posted: December 22, 2006 at 5:59 PM
posted_imageBattery YELLOW (+) IGNITION SWITCH HARNESS 
posted_imageIgnition 1 LIGHT GREEN/ VIOLET (+) IGNITION SWITCH HARNESS 
posted_imageIgnition 2 GRAY / YELLOW (+) IGNITION SWITCH HARNESS 
posted_imageAccessory 1 BLACK/ GREEN (+) IGNITION SWITCH HARNESS 
posted_imageStarter 1 RED / LIGHT BLUE (+) IGNITION SWITCH HARNESS 
posted_imageAnti-Theft Type SECURILOCK 
posted_imageAnti-Theft Descript AN RF SIGNAL ACTIVATED SYSTEM 
posted_imageKey Sense BLACK/ PINK (-) IGNITION SWITCH HARNESS 
posted_imageNeutral Safety RED / LIGHT BLUE (+) IN HARNESS TO TRANSMISSION 
posted_imageTachometer TAN/WHITE (-) AT IGNITION COIL 
posted_imageSpeed Sense GRAY/BLACK (AC) IN HARNESS ON PASSENGER SIDE OF ENGINE COMPARTMENT 
posted_imageParking Lights WHITE/ BLACK (+) AT VEHICLE LIGHT SWITCH 
posted_imageBrake Lights LIGHT GREEN (+) AT SWITCH ABOVE BRAKE PEDAL 
posted_imageReverse Lights BLACK/ PINK (+) IN HARNESS FROM GAUGES 
    
 Note: Audiovox makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Audiovox disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation. 
  


-------------
Ed


Print Page | Close Window