valet 561R

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87630
Printed Date: May 09, 2025 at 8:27 AM

Topic: valet 561R

Posted By: jaurora
Subject: valet 561R
Date Posted: December 22, 2006 at 8:07 AM

Quick question. I know these units will pulse (-) for the door locks. I guess my question is if there is an application to pulse a (+) will these work if I switch the wires from blue as unlock and green as lock to green as unlock to blue as lock or vise versa? I know when I installed prestge's they worked this way.

-------------
MECP certified (If it really means anything)
Jeremy

Replies:

Posted By: KarTuneMan
Date Posted: December 22, 2006 at 8:28 AM

On the transmitter, won't lock become unlock and visa/versa ?

A NEG(-) output can only become a POS(+) if it is programable, or by the use of a relay.....

-------------

Posted By: jaurora
Date Posted: December 22, 2006 at 8:34 AM

On the prestige units, it had the 2 wires for lock and unlock, lets say blue and green. Now if you had a (-) trigger locks the green would be used for lock and the blue would be used for unlock. If you had (+) trigger locks, now the green wire would unlock and the blue would lock. There was no programming need to pull this off.

I just want to know if the 561r does the same.

-------------
MECP certified (If it really means anything)
Jeremy

Posted By: chris354
Date Posted: December 22, 2006 at 8:44 AM

No the 561r says in the manual it will but this is a misprint, they will only do neg.

Posted By: jaurora
Date Posted: December 22, 2006 at 9:05 AM

Thank you.

That was the info I was looking for!

-------------
MECP certified (If it really means anything)
Jeremy

Print Page | Close Window