Diode type
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87680
Printed Date: May 15, 2025 at 9:07 PM
Topic: Diode type
Posted By: gassaver
Subject: Diode type
Date Posted: December 23, 2006 at 11:29 AM
I'm going to be installing a alarm on my 95 honda civic cx hatchback. The car has (-) door triggers. And I have a feeling that I"m going to have to isolate both doors and my hatch. My question is, what diode and I'm going to need to isolate the doors. Or is just using the drivers side door enough that it is going to cover all doors when alarmed.
Replies:
Posted By: profuse007
Date Posted: December 23, 2006 at 12:28 PM
DOOR TRIGGER LIGHT GREEN/ RED (-) IN DRIVERS KICK PANEL
i think the wire above will catch all doors, if i can recall. if not use 1n400x, i use 1n4001. can be purchase from radio shack. www.mouser.com have them, very quick shipper.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|