2001 Grand Am Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87688
Printed Date: May 27, 2024 at 3:02 PM
Topic: 2001 Grand Am Remote Start
Posted By: jonjon8885
Subject: 2001 Grand Am Remote Start
Date Posted: December 23, 2006 at 2:38 PM
I have the DEI Valet 561R Remote Start for my car does anyone have any idea on how you wire it? I have no idea what the 4 pin Satillite harness is for.
Replies:
Posted By: Twelvoltz
Date Posted: December 23, 2006 at 4:58 PM
If you are not familiar with automotive electrical systems, I would STRONGLY recommend having an installer do the job for you. You will also need a bypass module for the 01 Grand Am in addition to just the starter itself.
Posted By: jonjon8885
Date Posted: December 28, 2006 at 5:39 PM
I already have the bypass module hooked up and working, it gives me no description on what the satillite harness is for, and i cant get the remote start to work.
Posted By: lanman31337
Date Posted: December 29, 2006 at 7:48 AM
Satellite harness might be for negative outs for wiring in relays to power 2nd ignition or 2nd starters. Second, how do you know the bypass module is working if the remote start isn't?
Posted By: jonjon8885
Date Posted: January 05, 2007 at 12:41 PM
I can start the vehicle without using the key by giving power to the ignition wires, and then i can just give power to the starter wire to crank it. After that the car will run.
The remote start doesnt sent the power to the wire that it needs to when the button has been pressed. Thanks for the info above.
|