Hello Guys, I am installing a Keyless Upgrade Hornet 727T to my Toyota 2007 Land Cruiser Prado.
My problemo is that when I arm the system the siren chirp and the horn honk too. Also when I disarm the systen the siren chirp twice and the horn honk twice too
I dont want the horn to hunk during arming and disarming. I just want to hear the siren chirps but if the alarm goes off I want the siren + the horn to hunk.
Is there is a way to do this? If I need to do a electronic gadget, please give me the diagram.
THX,
Isaac
Check the program parameters,you can chang the sirene and horn output..........
-------------
Jamaica home of the worlds fastest man.
ringojam wrote:
Check the program parameters,you can chang the sirene and horn output..........
Are you sure. I have read the manual and instrucction and does not say nothing about. I dont want the horn to hunk during arming/disarming. I just want to hear the soft chirp from the siren. But if the alarm goes off trigered by a sensor or door open, I want the Horn to honk and the siren at the same time.
THX,
Isaac
captainzab wrote:
i read through the manual,
cant do what you are asking (only the new units with alarm can)
Dont undertan what you mean: "only the new units with alarm can"
THX,
Isaac
turbo_boss wrote:
captainzab wrote:
i read through the manual,
cant do what you are asking (only the new units with alarm can)
Dont undertan what you mean: "only the new units with alarm can"
THX,
Isaac
Only way to do what your asking is to not hook up the horn output to your vehicle.....
Use the ground when armed output wire to a exteranl relay on a separte horn. That way it will sound and your siren will too when the alarm is activated.
jaxzin wrote:
Only way to do what your asking is to not hook up the horn output to your vehicle.....
Use the ground when armed output wire to a exteranl relay on a separte horn. That way it will sound and your siren will too when the alarm is activated.
Hey Jaxin, I really dont undertand your explication.
Can you please draw me a schematic.
Ground when armed output wire to 86
were to wire 85?
Thx,
Isaac