code alarm ca330 vs dei 727t

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87813
Printed Date: May 15, 2025 at 1:48 AM

Topic: code alarm ca330 vs dei 727t

Posted By: ihkili18
Subject: code alarm ca330 vs dei 727t
Date Posted: December 26, 2006 at 2:03 PM

Hey guys, in your opinion which one of these keyless entry upgrade alarm system is better? The code alarm ca330 or the hornet 727t. Thank you so much

Replies:

Posted By: ihkili18
Date Posted: December 26, 2006 at 3:40 PM

Anybody have any experience with either of these? Let me know

Posted By: turbo_boss
Date Posted: December 26, 2006 at 5:54 PM

I will go with the 727T. I have intal several Directed Electronic products and they are very good including the 727T. I also like the way the 727T works.

For example when you lock the doors with the 727T it chirps one time. The CA330 chirps 2 times :-(

also the way to put the CA 330 in valet is more complicated...........................

I will recomend you to go with the 727T

Isaac

Posted By: ihkili18
Date Posted: December 26, 2006 at 7:21 PM

What about on board and included relays, which one has more? Thanx

Posted By: ihkili18
Date Posted: December 26, 2006 at 9:44 PM

Do both of these come with onboard or included external relays for the horn honk and whatever else thats neccesary.thanx

Posted By: turbo_boss
Date Posted: December 27, 2006 at 8:35 AM

The 727 comes only with the flashing light relay built inside. Its come with the starter interrup relay outside.

The 727T have a negative output wire that you conect to your horn wire that come from the steering wheel. Usually all the car have this wire and is a negative one and you dont need a relay for this conection.

Check here under donwload and you will find the instalation manual for the 727T

Posted By: ihkili18
Date Posted: December 27, 2006 at 10:08 AM

you sure the horn wire doesn't need a relay? Is the 200 ma that the alarm provides enough to drive the horn?thanx

Posted By: captainzab
Date Posted: December 27, 2006 at 10:28 AM

no relay need when driving neg trigger horn (you are turning on the car's relay to turn on the horn)

-------------
Note: You Always Dont Get What You Pay For.

Posted By: mobilecustoms
Date Posted: December 27, 2006 at 10:43 AM

id use ei 727t i like the dei line a lot over the code stuff

-------------

Posted By: ihkili18
Date Posted: December 27, 2006 at 11:17 AM

thanx for the info

Posted By: turbo_boss
Date Posted: December 27, 2006 at 4:02 PM

captainzab wrote:

no relay need when driving neg trigger horn (you are turning on the car's relay to turn on the horn)

captainzab is right! With the horn wire from the 727T you going to drive the factory horn relay from the car so yo do not need to intall a relay.

Good luck,

Isaac