Print Page | Close Window

03 explorer remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87826
Printed Date: July 07, 2025 at 4:58 PM


Topic: 03 explorer remote start

Posted By: playtilithrtz
Subject: 03 explorer remote start
Date Posted: December 26, 2006 at 6:02 PM

Hello, I have an 03 Explorer and a Viper 791xv that was previously installed on my 04' Tiburon. Now I would like to know if I need that bypass module the 556U or the 555U bypass module for the remote start.

Also I would like to know about the Tach wire. Do I have to tap into the ignition coil from the engine bay or is their another spot IN the car that I can take it from.

And lastly, I was reading about the power locks lock when the car is put in drive, and that someone installed the alarm and lost that feature. How do I not lose that feature, I would like for my door locks to lock and unlock when the car is in drive and shutoff.

thank you in advance




Replies:

Posted By: KarTuneMan
Date Posted: December 26, 2006 at 6:18 PM
You DO need a bypass for the ignition.....The tach is under the hood only, unfortunatly. But is easy to get at. The door locks you could do ignition controlled. It's NOT the same as putting your car into drive though.

-------------


Print Page | Close Window