Print Page | Close Window

02 sebring horn problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87887
Printed Date: May 07, 2024 at 1:56 PM


Topic: 02 sebring horn problem

Posted By: windsor
Subject: 02 sebring horn problem
Date Posted: December 27, 2006 at 6:11 PM

I installed a remote starter in a 2002 sebring without factory alarm. Everything works fine, I have not tapped into the lock/unlock wire, everything is stock but if the car sits for a while and is started with the remote, the horn will honk one time,very annoying. Is there anything that can be done to eliminate this? It is a prostart(canadian)model 3310.



Replies:

Posted By: NowYaKnow
Date Posted: December 27, 2006 at 6:30 PM
I would say the car does have a factory alarm because thats what chryslers do if you remote start them with the alarm armed. Might want to double check that.

Mike




Posted By: Mike M2
Date Posted: December 27, 2006 at 6:35 PM
I agree, if you don't get a factory disarm wire and hook it up it will blow the horn when the ignition turns on from the remote start. No doubt about it, you need to connect that wire to stop the problem...

-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: windsor
Date Posted: December 27, 2006 at 6:39 PM
so I would just have to hook up the disarm wire? I can I tell for sure if it has a factory alarm?




Posted By: Mike M2
Date Posted: December 27, 2006 at 6:45 PM

"" I can I tell for sure if it has a factory alarm?""

Easy, it will honk the horn if you remote start it :)......

You can lock the door with the key and wait 2 minutes, then open the door using the plunger inside the car. The horn will honk because there's really no question that it has one. You don't mention whether it's a covertable, 2 door, or 4 door. They are different.....

In any case, yes you need to pulse the disarm wire before start...



-------------
Mike M2
Tech Manager
CS Dealer Services




Posted By: windsor
Date Posted: December 27, 2006 at 6:53 PM
it will only honk it one time, its a four door.




Posted By: windsor
Date Posted: December 27, 2006 at 8:03 PM
yea, ok, there is an alarm, and I'm really alarmed at that. No blinking lights , nothing. Thanks for the help, kids.





Print Page | Close Window