2007 Dodge Ram 1500 Quad Cab starter wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87996
Printed Date: June 10, 2024 at 7:00 AM
Topic: 2007 Dodge Ram 1500 Quad Cab starter wire
Posted By: Tloodis
Subject: 2007 Dodge Ram 1500 Quad Cab starter wire
Date Posted: December 29, 2006 at 3:35 PM
I'm installing a python 991xp in this truck and have everything working except for the starter kill and remote start due to the fact that I can't find the primary starter wire (supposed to be GREEN/ YELLOW from 06 model)!!! I've tested every wire in the ignition harness with no luck. I found the 2nd starter (PURPLE / brown) but don't know if I use the one on the sentry ring harness or the harness under the turn signal. Any help is appreciated. Thanks in advance.
Replies:
Posted By: Hymer
Date Posted: December 29, 2006 at 3:43 PM
There isn't one! Its all muxed into the 2nd start and accy wire.. what bypass are you useing?
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Tloodis
Date Posted: December 29, 2006 at 3:52 PM
Just used a 556uw. can't figure out how to get the starter kill and accessory to work. I wired it up using the dei 1084 diagram with the -accessory/starter wire. can I use this and the starter kill? Thanks for the quick response.
Posted By: Hymer
Date Posted: December 29, 2006 at 4:04 PM
Sorry but Im not framiliar with dei's newer stuff.. I use a xk532 or chdl7pk 2 for these new dodges, I'm sure someone will chime in! with the new bypasses ya don't need to worry about starter kill and second accy stuff...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
|