Print Page | Close Window

2006 hyundai sonata, window module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88006
Printed Date: July 02, 2025 at 8:44 PM


Topic: 2006 hyundai sonata, window module

Posted By: yam900
Subject: 2006 hyundai sonata, window module
Date Posted: December 29, 2006 at 6:17 PM

hi there, i am trying to fit a 4 window closure module to a 2006 Hyundai Sonata. The 3 passenger windows all have 2 wire reverse polarity motors and rest at ground switches but the drivers side window motor has 5 wires ...1 permanent 12 volt positive...1 permanent grounded negative...2 sensor wires for up and down and 1 wire which goes to the bcm....... The motor has a built in relay with hall effect sensor and shunt resistor.

The drivers side switch is auto up and auto down and the window will reverse from up to down movement if it senses any force or pressure when it is in the up position...Can anyone tell me how to wire the window closure module to the drivers side motor and if i will need to wire a relay to reverse the polarity

                                     many thanks

                                           yam900




Replies:

Posted By: profuse007
Date Posted: December 29, 2006 at 8:21 PM
use 2 DEI 530t for up and down, or use 1 for either up or down.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).





Print Page | Close Window