How to protect factory HID lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88023
Printed Date: May 02, 2025 at 8:28 PM

Topic: How to protect factory HID lights

Posted By: turbo_boss
Subject: How to protect factory HID lights
Date Posted: December 29, 2006 at 10:43 PM

Guys, I am helping a friend that have a Nissan 350Z with factory HID front lights. As you may know thieves are stealing these lights and the factory alarm does not sound. I was thinking on order a Omega AU-83 remote piezo sensors and put one piezo sensor on the back of each HID light. If a thief is tampering whit the light assembly it will triger the factory alarm.

My Concern is the following:

What do you thing of my idea?

Do the engine heat will damage the Piezo Sensors?

Is there is another idea on how to protec and wire the HID to triger the factory alarm?

Atached is a pic of the Omega AU-83 remote piezo sensor unit.

posted_image

THX,

Isaac

Replies:

Posted By: jacqueslacombe
Date Posted: December 30, 2006 at 3:31 AM

Well those light are so easy to stole ( I thing the 350z as a factory alarme so they need to open the hood to get acces ) the alarme should go off ( when is't armed )

-------------
cocolaboy

Posted By: turbo_boss
Date Posted: December 30, 2006 at 10:11 AM

jacqueslacombe wrote:

Well those light are so easy to stole ( I thing the 350z as a factory alarme so they need to open the hood to get acces ) the alarme should go off ( when is't armed )

Well, I going to hook up the AU-83 to the hood pin, so when they tamper with the HID the factory alarm goes off.

Isaac

Posted By: turbo_boss
Date Posted: December 30, 2006 at 10:14 AM

Also, what would be another way to protec the HID on the 350Z ...............What you guys are doing? Any other advise.

THX,

Isaac

Posted By: KarTuneMan
Date Posted: December 30, 2006 at 6:39 PM

Thats the part I don't understand......how do they get the lights out WITHOUT opening the hood (hood pin with alarm).....does that NOT solve the problem

-------------