Print Page | Close Window

1989 Mercedes 190 Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88044
Printed Date: May 12, 2024 at 8:25 PM


Topic: 1989 Mercedes 190 Remote Start

Posted By: 666arc
Subject: 1989 Mercedes 190 Remote Start
Date Posted: December 30, 2006 at 10:47 AM

Hi all

Read through various posts and still can't get my remote start to work correctly.

It primes the fuel pump and cranks the engine but just doesn't fire up.

The alarm is a Falcon Predator EVO4 and I've connected as follows :

Alarm Connection 1 should be connected to "On" ie gives 12v when key in any position incl cranking - connected to RED / Green in Ignition harness.

Alarm Connection 2 should be connected to Start - connected to Violet/White in ignition harness

Alarm Connection 3 should be connected to Acc - connected to RED / Black in ignition harness

Alarm Connection 4 should be connected to constant 12V - conencted to Red in ignition harness

Please could anyone help to shred any light on this.

Thanks

Andy




Replies:

Posted By: wlmpwlmp
Date Posted: December 31, 2006 at 9:27 AM
 you say your alarm 1 wire needs constant power and you have connected  to RED / green? use your test light on this wire i believe this is the heater/accesory!!  the constant in your car is red. starter PURPLE / w white. ign 1 RED / w black, ign 2 red w/ yellow, and heater is RED / w green. it looks as tho you are missing that second ign connection.

-------------
WesMan


Print Page | Close Window