valet 561t, 2007 F350 diesel

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88056
Printed Date: May 04, 2025 at 8:28 PM

Topic: valet 561t, 2007 F350 diesel

Posted By: rnemtb
Subject: valet 561t, 2007 F350 diesel
Date Posted: December 30, 2006 at 2:30 PM

Hi, iam installing a valet 561t in a 2007 ford f350 diesel is the install guide for the 561r the same? i took the r/s out of the customers 2004 excursion. i searched the site but could only find the561r guide.

thanks and happy new year to all

george

-------------
rnemtb

Replies:

Posted By: swamprat323
Date Posted: December 30, 2006 at 6:00 PM

its already in the download sectiosn on this site.
download section

Posted By: rnemtb
Date Posted: December 31, 2006 at 12:13 PM

thanks for the help swamprat323, i must haved missed it. i have it now

-------------
rnemtb

Posted By: rnemtb
Date Posted: January 08, 2007 at 11:24 AM

hi , installing a valet 561t r/s to a 2007 F350 diesel, took r/s out of 2004 excursion.the only wires that were hooked up in excursion are:

heavy wires as normal at ignition harness

ground

white - parking lights

WHITE/ red-? in kick panel

customer was using ford factory remotes with 3 pulse trigger. my questionis the WHITE/ red wire does this attach to the blk/light blue in kick panel for the door trigger ,will be using ford factory remotes on 2007 F-350.

thanks

george

-------------
rnemtb

Posted By: actypes
Date Posted: January 08, 2007 at 11:41 AM

no, the door trigger wire does not control the activation of the 561t. Remember, if your using the factory remote the WHITE/ red ALWAYS goes to the lock motor wire. Just the lock wire will not do the job. Use a thick pink/black in the driver kick. Test by probing the pink/black and pressing the lock button on the factory remote. Should pulse pos.

Posted By: actypes
Date Posted: January 08, 2007 at 11:45 AM

Your also going to NEED to use a pulse timer to delay the starting of the trunk. You cannot use the wait-to-start wire. Hopefully you know about the glow plugs and why this is necessary

Posted By: rnemtb
Date Posted: January 08, 2007 at 11:50 AM

thank to all i am using a 528t pulse timer already attached.

george

-------------
rnemtb