Clifford alarm 50.5x
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88057
Printed Date: May 04, 2024 at 11:00 PM
Topic: Clifford alarm 50.5x
Posted By: mroe
Subject: Clifford alarm 50.5x
Date Posted: December 30, 2006 at 2:44 PM
Trying to wire in the remote starter on a Clifford 50.5X to a 1995
Toyota Tacoma pickup. according to 12.com here are my wiring
assignments in the vehicle:
Constant 12v white - ign. switch
Starter black - ign. switch
Ign blk/yel - Ign switch
Ign 2 blk/red - Ign switch
Assorc. blue/red - Ign switch
tach BROWN / black - in multi coil pack
I have the alarm working and need to connect up the remote start but
am not sure of the conections. First, do I need to connect Ign and Ign
2 also? Even with the instalation manual, I'm having trouble finding
the correct ignition wire. So far it will crank over but will not
start. Not sure of the tach wire or the proper ignition power wire.
They say the tach wire is in the Multi coil pack, where the heck is
that? Any help would be appreciated.
Replies:
Posted By: KarTuneMan
Date Posted: December 31, 2006 at 9:51 AM
Do you need to do a clutch bypass...or is it an auto trans? -------------
Posted By: mroe
Date Posted: December 31, 2006 at 12:50 PM
Auto trans
Posted By: profuse007
Date Posted: December 31, 2006 at 1:11 PM
look at xcrs relay pack.
red ->Constant 12v white - ign. switch
pink->Ign blk/yel - Ign switch
pink/white->Ign 2 blk/red - Ign switch
orange->Assorc. blue/red - Ign switch
cut starter wire in half:
Starter black - ign. switch
-green to key side at one half
-purple to starter side at the other half.
tach BROWN / black - in multi coil pack
not sure at the year of the 5vzfe that use coil over plug(COP) or individual coil. check at any sparkplug.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: mroe
Date Posted: January 01, 2007 at 6:43 AM
It's coil over plug, that's what confused me. If I had a standard coil, I'm sure I could have just used the one of the coil wires. Not sure how the coil over plug works, So I'm going to use the wire that comes off the back of the tach it's self. Hopfully that should work. Thanks againm for the help.
|