90 Ford Probe GT Clutch Type?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88076
Printed Date: May 03, 2025 at 12:09 AM

Topic: 90 Ford Probe GT Clutch Type?

Posted By: brysonk
Subject: 90 Ford Probe GT Clutch Type?
Date Posted: December 30, 2006 at 8:13 PM

Anyone know what type of clutch switch is used on this car? Installing a prostart for manual Trans and have everything else figured out exept for the remote starter lol. Nothing happens when I hit the start button?? I tried wiring the starter output from the RS to the starter side of the clutch switch but no juice. any suggestions?

thanks

Replies:

Posted By: profuse007
Date Posted: December 31, 2006 at 12:28 PM

you need to figure out the RS ahead of time b4 bypassing clutch.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: dea,can
Date Posted: January 02, 2007 at 2:51 AM

in the manual book tells u how to test for clutch type system pages 12 to 14 read that.

-------------
dragon

Posted By: dea,can
Date Posted: January 02, 2007 at 3:02 AM

also did u put in ready mode.

posted_image

-------------
dragon

Posted By: brysonk
Date Posted: January 02, 2007 at 8:09 PM

Thanks for the help guys but it turns out I had the wrong door trigger wire from the RS hooked up. I used the +trigger when I should have used the - one. Had the starter output wired correctly after all. Works fine now. Again thanks for your replys.

bryson

Print Page | Close Window