trunk release using python 460hp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88080
Printed Date: May 06, 2025 at 12:35 PM

Topic: trunk release using python 460hp

Posted By: jbuenojr
Subject: trunk release using python 460hp
Date Posted: December 30, 2006 at 8:31 PM

just checking to see if i am right about using a relay for this. i am using a python 460hp alarm in a 02 corllora 4 -door

red / white wire is the auxiliary

i would have to use a relay to send a 12v current to the soleniod, with the relay being normally open.

87 would be the 12v power

86 would be the auxiliary wire (200ma)

85 would be to ground

30 to the lead for the trunk release soleniod

Am i right on this?

John

Replies:

Posted By: chris354
Date Posted: December 30, 2006 at 9:03 PM

87 12volt

86 12volt

85 aux. RED / white

30 trunk solenoid

Print Page | Close Window