Viper 5900, sensor, door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88312
Printed Date: July 06, 2025 at 5:19 AM

Topic: Viper 5900, sensor, door locks

Posted By: heyitzalan
Subject: Viper 5900, sensor, door locks
Date Posted: January 03, 2007 at 8:52 PM

Hi, i just ordered a viper 5900, and it only come with stinger double shock sensor. Anybody have clue how to add one or more sensor like tilt or glass sensor with the stinger double shock sensor?

HELP! posted_image

Replies:

Posted By: profuse007
Date Posted: January 03, 2007 at 9:37 PM

its plug and play. there should be two more ports for sensors.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: Ravendarat
Date Posted: January 03, 2007 at 9:38 PM

Or if you get a piece thats not dei you can add it on using the multiplex blue input wire on the brain or using the green wire on the shock sensor side of the harness for instant trigger. You have many options here.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Posted By: heyitzalan
Date Posted: January 03, 2007 at 9:42 PM

there is only one "shock sensor" port, nothing else.

Posted By: profuse007
Date Posted: January 03, 2007 at 9:46 PM

appologize for that. i was thinking of 5000 brain but you can wire it through the shock sensor like above mentioned.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: heyitzalan
Date Posted: January 03, 2007 at 9:51 PM

i only have power(red), ground(black), alarm negative output(blue), and warn negative output(green) wires in the shock sensor port, i want to add tilt and glass sensor along with the same wire, how can i do that?

Posted By: heyitzalan
Date Posted: January 04, 2007 at 11:06 PM

anyone know?

Posted By: heyitzalan
Date Posted: January 13, 2007 at 4:40 PM

I have solder my actulator to my viper + and - wire to the brain. i press arm and disarm it won't lock or unlock my actulator. All it does is beep, and beep beep.

Print Page | Close Window